Question : SNMP Service

I get this error after installing SNMP service:

The Open Procedure for service "Tcpip" in DLL "Perfctrs.dll" failed.  Performance data for this service will not be available. Status code  returned is DWORD 0.

Load of INETMIB1.DLL failed. Make sure the DLL file is in the PATH. WIN32 Error number is returned in the data.


Any ideas on a fix....

I'm running service pack 6.

Here is what I found on the net and did.  Still not working.

> Necessary software:
> · Windows NT 4.0 or higher (for server or workstation)
> · WindowsNT Service Resource Kit, Supplement #2
> · WindowsNT ServicePak #3, #4, or #5
> · INSoft EPRO PerfMIB batchfile, attached as NT-PerfMIB-Batchfile.zip
>
> Secondary:
> · Fix for inetmib1.dll (if using ServicePak #3), attached as
> NT-inetmib1-fix.zip
>
> 1) Remove SNMP Service on the NT server (if installed). If
> the Compaq Insight Manager is already installed, it must be removed.
> 2) Reboot the server
> 3) Install SNMP Service.
> 4) Reboot the server
> 5) Install ServicePak #4 (or ServicePak #3
> 6) Reboot the server
> 7) If using ServicePak #3, install the inetmib1.dll
> (instructions and dll file attached together in: NT-inetmib1-fix.zip)
> 8) Copy the INSoft EPRO PerfMIB batchfile (attached:
> NT-PerfMIB-Batchfile.zip) onto a floppy disk and unzip
> 9) Copy the perfmib.dll file from Supplement #2 to the same
> floppy disk
> 10) Run the batch file off the floppy drive
> 11) Try to discover the NT server via VitalNet's admin interface.
 - NT-inetmib1-fix.zip
 - NT-PerfMIB-Batchfile.zip

Answer : SNMP Service

Question will move to PAQ.

ComTech
Community Support Moderator